This DAS Motor product guide reviews the Mercedes-Benz W118 / C118 CLA45 FDGT Carbon Front Canard, a front canard associated with W118 / C118 CLA45 with CLA45 sport bumper [CLA45 Only]. It focuses on compatibility, carbon construction, fitting requirements, availability and purchase preparation.
Mercedes-Benz W118 / C118 CLA45 FDGT Carbon Front Canard overview
Front canards add small directional surfaces at the outer bumper corners and emphasise the width of the front apron. Angle, vertical spacing and left-to-right symmetry are more visible than the size of the individual piece.
The C118 CLA Coupe and X118 Shooting Brake share a design language but differ around the roof and rear bodywork. CLA45, AMG Line and standard bumpers can also require different aerodynamic pieces.
The FDGT designation identifies the visual variant of this product. It should be compared directly with the regular FD version, particularly around projection, corner treatment and the way it connects with adjacent bumper or sill lines.
Specifications and Mercedes-Benz application
- Vehicle application: W118 / C118 CLA45 with CLA45 sport bumper [CLA45 Only]
- Model years: 2019-now
- Product type: Front Canard
- Style: FDGT
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / 3M tape adhering
Compatibility and fitment for W118 / C118 CLA45 with CLA45 sport bumper [CLA45 Only]
Compare the exact corner vent, bumper crease and AMG package because canards are shaped for a very local mounting area. The body style and factory exterior package should match the product photographs at every mounting edge.
Before ordering for a vehicle from 2019-now, compare close photographs of both mounting edges. Badge names often continue across styling revisions, while the bumper or boot-lid geometry changes underneath.
Installation requirements
The stated method is Add on / 3M tape adhering. Adhesive installation depends on temperature, surface preparation and uninterrupted contact pressure; polish, wax and silicone dressing must be removed from the bonding area.
Mark both sides before drilling or bonding and confirm steering clearance, panel access and equal positioning. Complete the alignment check in the normal resting position of the panel, then tighten or bond progressively from the centre towards the ends.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
Place the uninstalled part on a padded surface and compare left and right sides. Uneven curvature, twisted mounting flanges or blocked holes should be resolved before the vehicle is dismantled.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
A complete installation plan should include consumables and labour as well as the component itself. Adhesive promoter, replacement clips, corrosion protection or bumper removal can change the real scope of the job.
Check the leading edges for chips and verify that small fasteners remain tight. Record the fitted part in the vehicle's maintenance notes so a workshop knows where non-factory clips, adhesive or drilling points may be present.
Mercedes part pre-order checklist
- Compare product and vehicle photographs at the same angle.
- Confirm year range against the build date.
- Identify any previous bumper or body repair.
- Check whether factory clips can be reused.
- Budget for preparation and installation materials.
- Verify the seller's policy before drilling or bonding.
Mercedes-Benz W118 / C118 CLA45 FDGT Carbon Front Canard FAQ
Does this front canard fit every W118 / C118 CLA45 with CLA45 sport bumper [CLA45 Only]?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz W118 / C118 CLA45 FDGT Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA45 FD Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA Shooting Brake FD style Carbon Trunk Spoiler
- Mercedes-Benz W118 / C118 CLA FDGT Carbon Rear Diffuser
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
