This DAS Motor product guide reviews the Mercedes-Benz W118 / C118 CLA45 FD Carbon Front Lip, a front lip associated with W118 / C118 CLA45 with AMG CLA45 sport bumper. It focuses on compatibility, carbon construction, fitting requirements, availability and purchase preparation.
Mercedes-Benz W118 / C118 CLA45 FD Carbon Front Lip overview
A front lip extends the visual lower edge of the bumper and can make the nose appear lower and wider. The important design points are the centre projection, the transition into the bumper corners and even clearance across the full width.
The C118 CLA Coupe and X118 Shooting Brake share a design language but differ around the roof and rear bodywork. CLA45, AMG Line and standard bumpers can also require different aerodynamic pieces.
The stated FD style defines this particular shape within the supplier's range. Products carrying the same general name can still differ in projection, number of pieces and mounting geometry.
Specifications and Mercedes-Benz application
- Vehicle application: W118 / C118 CLA45 with AMG CLA45 sport bumper
- Model years: 2019-now
- Product type: Front Lip
- Style: FD
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / drilling screw & bolt
Compatibility and fitment for W118 / C118 CLA45 with AMG CLA45 sport bumper
Compare the underside screw positions, outer corner shape and the profile around any factory splitters or cooling openings. The body style and factory exterior package should match the product photographs at every mounting edge.
Compatibility should be confirmed in three stages: chassis code, production date and exterior package. The published range of 2019-now remains useful only when all three match the photographed vehicle.
Installation requirements
The stated method is Add on / drilling screw & bolt. Mark and test-fit every mounting point before drilling, protect exposed holes against corrosion where applicable and tighten fasteners evenly rather than pulling an inaccurate part into position.
Front lips are exposed to kerbs, ramps and road debris, so secure fastening and adequate ground clearance are more important than appearance alone. Complete the alignment check in the normal resting position of the panel, then tighten or bond progressively from the centre towards the ends.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
Review the supplied fasteners separately from the component. Generic screws or tape may not be appropriate for every mounting surface, and a professional installer may specify different hardware.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
A complete installation plan should include consumables and labour as well as the component itself. Adhesive promoter, replacement clips, corrosion protection or bumper removal can change the real scope of the job.
Inspect the lower surface periodically for impact marks, loose fasteners and clear-coat damage. After the first week, recheck alignment and every accessible fixing because adhesive settling and vibration can reveal an edge that was not fully supported.
Mercedes part pre-order checklist
- Photograph the current bumper, sill or boot lid.
- Verify the VIN and production month.
- Compare sensor, vent and exhaust positions.
- Confirm the number of pieces included.
- Ask whether fitting instructions are supplied.
- Plan inspection before modifying the component.
Mercedes-Benz W118 / C118 CLA45 FD Carbon Front Lip FAQ
Does this front lip fit every W118 / C118 CLA45 with AMG CLA45 sport bumper?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz W118 / C118 CLA45 FDGT Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA FDGT Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA FD Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA Shooting Brake FD style Carbon Trunk Spoiler
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
