Mercedes-Benz W118 / C118 CLA FDGT Carbon Front Lip is a Mercedes-Benz exterior upgrade listed for W118 / C118 CLA with AMG sport bumper. This 2027 buyer's guide covers compatibility, material, installation, price checks and the vehicle details to verify before ordering.
Mercedes-Benz W118 / C118 CLA FDGT Carbon Front Lip overview
A front lip extends the visual lower edge of the bumper and can make the nose appear lower and wider. The important design points are the centre projection, the transition into the bumper corners and even clearance across the full width.
The C118 CLA Coupe and X118 Shooting Brake share a design language but differ around the roof and rear bodywork. CLA45, AMG Line and standard bumpers can also require different aerodynamic pieces.
The FDGT designation identifies the visual variant of this product. It should be compared directly with the regular FD version, particularly around projection, corner treatment and the way it connects with adjacent bumper or sill lines.
Specifications and Mercedes-Benz application
- Vehicle application: W118 / C118 CLA with AMG sport bumper
- Model years: 2019-now
- Product type: Front Lip
- Style: FDGT
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / drilling screw & bolt
Compatibility and fitment for W118 / C118 CLA with AMG sport bumper
Compare the underside screw positions, outer corner shape and the profile around any factory splitters or cooling openings. The body style and factory exterior package should match the product photographs at every mounting edge.
Use 2019-now as the starting range, not the final proof of fitment. Facelift timing, regional equipment and previously replaced body panels can produce a different mounting surface on a car registered in the expected year.
Installation requirements
The stated method is Add on / drilling screw & bolt. Mark and test-fit every mounting point before drilling, protect exposed holes against corrosion where applicable and tighten fasteners evenly rather than pulling an inaccurate part into position.
Front lips are exposed to kerbs, ramps and road debris, so secure fastening and adequate ground clearance are more important than appearance alone. If trimming appears necessary, confirm the product version first; modification can prevent a return and may conceal an underlying fitment mismatch.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
Keep all protective film in place during the initial comparison, but lift it only where necessary to inspect the clear coat. Confirm the return procedure before making permanent modifications.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
Do not assume that parts carrying similar FD, FDGT, GT or AMG-style names are interchangeable. These labels describe appearance; the mounting shape must still correspond to the exact vehicle and bumper.
Inspect the lower surface periodically for impact marks, loose fasteners and clear-coat damage. Record the fitted part in the vehicle's maintenance notes so a workshop knows where non-factory clips, adhesive or drilling points may be present.
Mercedes part pre-order checklist
- Separate model name from chassis designation.
- Check sedan, coupe, estate or SUV application.
- Verify the exterior package and facelift version.
- Review material and visible finish.
- Confirm adhesive and mechanical mounting needs.
- Allow for professional test-fitting before coating.
Mercedes-Benz W118 / C118 CLA FDGT Carbon Front Lip FAQ
Does this front lip fit every W118 / C118 CLA with AMG sport bumper?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz W118 / C118 CLA45 FDGT Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA45 FD Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA FD Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA Shooting Brake FD style Carbon Trunk Spoiler
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
