The Mercedes-Benz W118 / C118 CLA FD Carbon Side Skirt Splitter is a model-specific Mercedes styling part for W118 / C118 CLA with AMG sport bumper. The sections below explain the stated specification, practical fitment checks, installation planning and buying questions that matter in 2027.
Mercedes-Benz W118 / C118 CLA FD Carbon Side Skirt Splitter overview
A side skirt splitter creates a lower visual line between the front and rear wheels and links the front and rear aerodynamic additions. Straightness, end treatment and projection from the sill determine whether both sides of the car appear symmetrical.
The C118 CLA Coupe and X118 Shooting Brake share a design language but differ around the roof and rear bodywork. CLA45, AMG Line and standard bumpers can also require different aerodynamic pieces.
The stated FD style defines this particular shape within the supplier's range. Products carrying the same general name can still differ in projection, number of pieces and mounting geometry.
Specifications and Mercedes-Benz application
- Vehicle application: W118 / C118 CLA with AMG sport bumper
- Model years: 2019-now
- Product type: Side Skirt Splitter
- Style: FD
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / drilling screw & bolt
Compatibility and fitment for W118 / C118 CLA with AMG sport bumper
Measure the sill length and check jack-point access, underbody covers and the shape of the factory side skirt. The body style and factory exterior package should match the product photographs at every mounting edge.
The listing gives model years 2019-now, but registration year alone is not enough. Decode the VIN or confirm the build date, then compare the bumper, sensors and trim level with the product gallery.
Installation requirements
The stated method is Add on / drilling screw & bolt. Mark and test-fit every mounting point before drilling, protect exposed holes against corrosion where applicable and tighten fasteners evenly rather than pulling an inaccurate part into position.
Long side components should be supported at several points during fitting to avoid twist and uneven fastener spacing. If trimming appears necessary, confirm the product version first; modification can prevent a return and may conceal an underlying fitment mismatch.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
Keep all protective film in place during the initial comparison, but lift it only where necessary to inspect the clear coat. Confirm the return procedure before making permanent modifications.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
When comparing alternatives, give priority to confirmed fitment and mounting quality rather than choosing only by weave pattern or the most aggressive shape. A slightly different bumper contour can create uneven gaps that remain visible after installation.
Inspect the underside after lifting the vehicle and after contact with steep ramps or road debris. Seasonal temperature changes are a useful time to inspect bonded joints, particularly where composite and painted metal expand at different rates.
Mercedes part pre-order checklist
- Photograph the current bumper, sill or boot lid.
- Verify the VIN and production month.
- Compare sensor, vent and exhaust positions.
- Confirm the number of pieces included.
- Ask whether fitting instructions are supplied.
- Plan inspection before modifying the component.
Mercedes-Benz W118 / C118 CLA FD Carbon Side Skirt Splitter FAQ
Does this side skirt splitter fit every W118 / C118 CLA with AMG sport bumper?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz W118 / C118 CLA FDGT Carbon Side Skirt Splitter
- Mercedes-Benz W118 / C118 CLA45 FDGT Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA45 FD Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA Shooting Brake FD style Carbon Trunk Spoiler
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
