The Mercedes-Benz W118 / C118 CLA FD Carbon Side Skirt Insert sits within the DAS Motor Mercedes-Benz parts cluster. Its suitability depends on chassis, body style, exterior package, material and mounting geometry—not the model badge alone.
Mercedes-Benz W118 / C118 CLA FD Carbon Side Skirt Insert overview
A side skirt insert adds texture or contrast within the factory sill rather than extending the complete lower edge. The insert should sit evenly inside the original recess and maintain consistent margins at the front and rear ends.
The C118 CLA Coupe and X118 Shooting Brake share a design language but differ around the roof and rear bodywork. CLA45, AMG Line and standard bumpers can also require different aerodynamic pieces.
The stated FD style defines this particular shape within the supplier's range. Products carrying the same general name can still differ in projection, number of pieces and mounting geometry.
Specifications and Mercedes-Benz application
- Vehicle application: W118 / C118 CLA with AMG sport bumper
- Model years: 2019-now
- Product type: Side Skirt Insert
- Style: FD
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / 3M tape adhering
Compatibility and fitment for W118 / C118 CLA with AMG sport bumper
Confirm that the factory skirt has the matching recess, length and trim package shown in the product photographs. The body style and factory exterior package should match the product photographs at every mounting edge.
The listing gives model years 2019-now, but registration year alone is not enough. Decode the VIN or confirm the build date, then compare the bumper, sensors and trim level with the product gallery.
Installation requirements
The stated method is Add on / 3M tape adhering. Adhesive installation depends on temperature, surface preparation and uninterrupted contact pressure; polish, wax and silicone dressing must be removed from the bonding area.
Dry fitting is important because an insert can look misaligned even when the overall length differs only slightly. Do not remove factory trim until the replacement component and all required clips, tape or fasteners have been compared side by side.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
Keep all protective film in place during the initial comparison, but lift it only where necessary to inspect the clear coat. Confirm the return procedure before making permanent modifications.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
When comparing alternatives, give priority to confirmed fitment and mounting quality rather than choosing only by weave pattern or the most aggressive shape. A slightly different bumper contour can create uneven gaps that remain visible after installation.
Watch for lifting at narrow tips and keep wax or dressing away from bonded edges. Record the fitted part in the vehicle's maintenance notes so a workshop knows where non-factory clips, adhesive or drilling points may be present.
Mercedes part pre-order checklist
- Separate model name from chassis designation.
- Check sedan, coupe, estate or SUV application.
- Verify the exterior package and facelift version.
- Review material and visible finish.
- Confirm adhesive and mechanical mounting needs.
- Allow for professional test-fitting before coating.
Mercedes-Benz W118 / C118 CLA FD Carbon Side Skirt Insert FAQ
Does this side skirt insert fit every W118 / C118 CLA with AMG sport bumper?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz W118 / C118 CLA45 FDGT Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA45 FD Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA Shooting Brake FD style Carbon Trunk Spoiler
- Mercedes-Benz W118 / C118 CLA FDGT Carbon Rear Diffuser
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
