This DAS Motor product guide reviews the Mercedes-Benz W118 / C118 CLA AMG Carbon Mirror Cover, a mirror cover associated with W118 / C118 CLA. It focuses on compatibility, carbon construction, fitting requirements, availability and purchase preparation.
Mercedes-Benz W118 / C118 CLA AMG Carbon Mirror Cover overview
Mirror covers introduce a concentrated carbon accent at eye level without altering the larger body panels. The shell must follow the indicator opening, lower seam and outer tip of the original mirror housing.
The C118 CLA Coupe and X118 Shooting Brake share a design language but differ around the roof and rear bodywork. CLA45, AMG Line and standard bumpers can also require different aerodynamic pieces.
The AMG-style reference describes the visual treatment of the component. Confirm whether the actual vehicle has a full AMG body, an AMG Line package or a standard bumper because those configurations are not necessarily interchangeable.
Specifications and Mercedes-Benz application
- Vehicle application: W118 / C118 CLA
- Model years: 2019-now
- Product type: Mirror Cover
- Style: AMG
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / 3M tape adhering
Compatibility and fitment for W118 / C118 CLA
Mirror shapes can change with model year, market equipment and camera packages, so compare the complete housing rather than only the vehicle model. The body style and factory exterior package should match the product photographs at every mounting edge.
Before ordering for a vehicle from 2019-now, compare close photographs of both mounting edges. Badge names often continue across styling revisions, while the bumper or boot-lid geometry changes underneath.
Installation requirements
The stated method is Add on / 3M tape adhering. Adhesive installation depends on temperature, surface preparation and uninterrupted contact pressure; polish, wax and silicone dressing must be removed from the bonding area.
Replacement shells require careful release of plastic clips, while overlay covers depend on complete adhesive contact around the perimeter. Use masking tape reference marks during the dry fit so the final position can be reproduced after cleaning the mounting surface.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
Use the gallery images to identify intended orientation and contact points. If the received component differs in edge shape or hole placement, stop before installation and verify the version.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
Product photographs are useful for recognising the design, but they do not replace a measurement or chassis check. Ask for dimensions or a VIN-based confirmation when the exterior package is unclear.
Inspect edges near the indicator and folding joint, where washing and repeated mirror movement can reveal poor alignment. Use pH-neutral shampoo and a soft wash method; abrasive polish can change the gloss level of the clear coat relative to surrounding factory trim.
Mercedes part pre-order checklist
- Compare product and vehicle photographs at the same angle.
- Confirm year range against the build date.
- Identify any previous bumper or body repair.
- Check whether factory clips can be reused.
- Budget for preparation and installation materials.
- Verify the seller's policy before drilling or bonding.
Mercedes-Benz W118 / C118 CLA AMG Carbon Mirror Cover FAQ
Does this mirror cover fit every W118 / C118 CLA?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz W118 / C118 CLA45 FDGT Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA45 FD Carbon Front Lip
- Mercedes-Benz W118 / C118 CLA Shooting Brake FD style Carbon Trunk Spoiler
- Mercedes-Benz W118 / C118 CLA FDGT Carbon Rear Diffuser
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
