The Mercedes-Benz X247 GLB FD V2 Carbon Rear Diffuser (3-Piece) is a model-specific Mercedes styling part for X247 GLB with AMG sport bumper [GLB250 GLB35]. The sections below explain the stated specification, practical fitment checks, installation planning and buying questions that matter in 2027.
Mercedes-Benz X247 GLB FD V2 Carbon Rear Diffuser (3-Piece) overview
A rear diffuser replaces or overlays the lower bumper area to give the rear view a deeper and more technical appearance. Fin depth, exhaust-outlet spacing and the relationship to the bumper reflectors define the finished look.
The X247 GLB has upright SUV proportions, short overhangs and pronounced lower-body elements. Fitment checks should account for the bumper package and the different shapes used across standard and AMG Line versions.
This is identified as a V2 design. A second-version styling part is not automatically a direct replacement for V1, so compare the complete outline, included sections and mounting locations rather than relying on the shared product type.
Specifications and Mercedes-Benz application
- Vehicle application: X247 GLB with AMG sport bumper [GLB250 GLB35]
- Model years: 2019-
- Product type: Rear Diffuser
- Style: FD V2
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / drilling screw & bolt
Compatibility and fitment for X247 GLB with AMG sport bumper [GLB250 GLB35]
Compare exhaust configuration, parking sensors, tow equipment and bumper trim before assuming compatibility. SUV ride height and larger bumper surfaces make projection and lower-edge clearance especially relevant during a trial fit.
The listing gives model years 2019-, but registration year alone is not enough. Decode the VIN or confirm the build date, then compare the bumper, sensors and trim level with the product gallery.
Installation requirements
The stated method is Add on / drilling screw & bolt. Mark and test-fit every mounting point before drilling, protect exposed holes against corrosion where applicable and tighten fasteners evenly rather than pulling an inaccurate part into position.
A diffuser often uses a mixture of factory clips, screws and additional fasteners; the bumper should be supported during trial fitting. Check clearance through the full movement of nearby panels, wheels or tailgate components before the installation is considered complete.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
Place the uninstalled part on a padded surface and compare left and right sides. Uneven curvature, twisted mounting flanges or blocked holes should be resolved before the vehicle is dismantled.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
A complete installation plan should include consumables and labour as well as the component itself. Adhesive promoter, replacement clips, corrosion protection or bumper removal can change the real scope of the job.
Inspect the lowest fins and exhaust-adjacent areas for impact damage, heat exposure and loose fixings. Use pH-neutral shampoo and a soft wash method; abrasive polish can change the gloss level of the clear coat relative to surrounding factory trim.
Mercedes part pre-order checklist
- Confirm left-hand and right-hand symmetry.
- Measure the principal mounting surface.
- Check cameras, radar and parking sensors.
- Review exhaust and tow-equipment clearance.
- Inspect the delivery before dismantling the car.
- Retain packaging until fitment is established.
Mercedes-Benz X247 GLB FD V2 Carbon Rear Diffuser (3-Piece) FAQ
Does this rear diffuser fit every X247 GLB with AMG sport bumper [GLB250 GLB35]?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz X247 GLB FD Carbon Rear Diffuser (3-Piece)
- Mercedes-Benz X247 GLB FD V2 Carbon Front Lip (3-Piece)
- Mercedes-Benz X247 GLB FD Carbon Front Lip (3-Piece)
- Mercedes-Benz X247 GLB FD Carbon Roof Spoiler
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
