The Mercedes-Benz W213 facelift Sedan FD Carbon Side Skirt Splitter sits within the DAS Motor Mercedes-Benz parts cluster. Its suitability depends on chassis, body style, exterior package, material and mounting geometry—not the model badge alone.
Mercedes-Benz W213 facelift Sedan FD Carbon Side Skirt Splitter overview
A side skirt splitter creates a lower visual line between the front and rear wheels and links the front and rear aerodynamic additions. Straightness, end treatment and projection from the sill determine whether both sides of the car appear symmetrical.
Facelift W213 sedan bodywork differs from the earlier version around the bumpers, grille and trim details. A part described for the facelift car should not be assumed to fit a pre-facelift E-Class without a direct comparison.
The stated FD style defines this particular shape within the supplier's range. Products carrying the same general name can still differ in projection, number of pieces and mounting geometry.
Specifications and Mercedes-Benz application
- Vehicle application: W213 facelift Sedan with AMG sport bumper
- Model years: 2020-now
- Product type: Side Skirt Splitter
- Style: FD
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / drilling screw & bolt
Compatibility and fitment for W213 facelift Sedan with AMG sport bumper
Measure the sill length and check jack-point access, underbody covers and the shape of the factory side skirt. The sedan application should be checked against the boot lid and bumper shape rather than an estate, coupe or pre-facelift body.
Treat the 2020-now model-year statement as supplier guidance. A VIN check and a direct visual comparison are still necessary where AMG, AMG Line and standard exterior parts overlap.
Installation requirements
The stated method is Add on / drilling screw & bolt. Mark and test-fit every mounting point before drilling, protect exposed holes against corrosion where applicable and tighten fasteners evenly rather than pulling an inaccurate part into position.
Long side components should be supported at several points during fitting to avoid twist and uneven fastener spacing. Use masking tape reference marks during the dry fit so the final position can be reproduced after cleaning the mounting surface.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
On arrival, photograph the packaging and inspect the visible face under diffuse light. Also check the underside, corners and every bracket because transport damage often appears first at unsupported edges.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
Before paint protection film or ceramic coating is applied, complete a full trial fit. This avoids paying for surface finishing on a component that later requires trimming, drilling or replacement.
Inspect the underside after lifting the vehicle and after contact with steep ramps or road debris. Use pH-neutral shampoo and a soft wash method; abrasive polish can change the gloss level of the clear coat relative to surrounding factory trim.
Mercedes part pre-order checklist
- Photograph the current bumper, sill or boot lid.
- Verify the VIN and production month.
- Compare sensor, vent and exhaust positions.
- Confirm the number of pieces included.
- Ask whether fitting instructions are supplied.
- Plan inspection before modifying the component.
Mercedes-Benz W213 facelift Sedan FD Carbon Side Skirt Splitter FAQ
Does this side skirt splitter fit every W213 facelift Sedan with AMG sport bumper?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz W213 facelift Sedan FD Front Grille
- Mercedes-Benz W213 facelift Sedan FD Carbon Rear Diffuser
- Mercedes-Benz W213 facelift Sedan FD Carbon Front Lip
- Mercedes-Benz W213 facelift Sedan FD Carbon Trunk Spoiler
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
