The Mercedes-Benz W118 / C118 CLA FDGT Carbon Trunk Spoiler sits within the DAS Motor Mercedes-Benz parts cluster. Its suitability depends on chassis, body style, exterior package, material and mounting geometry—not the model badge alone.
Mercedes-Benz W118 / C118 CLA FDGT Carbon Trunk Spoiler overview
A trunk spoiler adds a defined finishing line to the deck lid and changes how the rear profile reads from the side and three-quarter view. Width, end-cap shape and the curvature against the boot lid determine whether the spoiler looks integrated or sits proud of the panel.
The C118 CLA Coupe and X118 Shooting Brake share a design language but differ around the roof and rear bodywork. CLA45, AMG Line and standard bumpers can also require different aerodynamic pieces.
The FDGT designation identifies the visual variant of this product. It should be compared directly with the regular FD version, particularly around projection, corner treatment and the way it connects with adjacent bumper or sill lines.
Specifications and Mercedes-Benz application
- Vehicle application: W118 / C118 CLA
- Model years: 2019-now
- Product type: Trunk Spoiler
- Style: FDGT
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / 3M tape adhering
Compatibility and fitment for W118 / C118 CLA
Check the complete deck-lid contour and confirm that the part is not intended for a different sedan, coupe or Shooting Brake rear panel. The body style and factory exterior package should match the product photographs at every mounting edge.
Compatibility should be confirmed in three stages: chassis code, production date and exterior package. The published range of 2019-now remains useful only when all three match the photographed vehicle.
Installation requirements
The stated method is Add on / 3M tape adhering. Adhesive installation depends on temperature, surface preparation and uninterrupted contact pressure; polish, wax and silicone dressing must be removed from the bonding area.
Adhesive-mounted spoilers require a clean, grease-free surface and careful dry positioning before the protective film is removed. Complete the alignment check in the normal resting position of the panel, then tighten or bond progressively from the centre towards the ends.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
Keep all protective film in place during the initial comparison, but lift it only where necessary to inspect the clear coat. Confirm the return procedure before making permanent modifications.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
Do not assume that parts carrying similar FD, FDGT, GT or AMG-style names are interchangeable. These labels describe appearance; the mounting shape must still correspond to the exact vehicle and bumper.
Avoid high-pressure washing directly against newly bonded edges until the adhesive has fully cured. If the vehicle is regularly driven on salted roads, rinse the underside and fasteners to reduce corrosion around added mounting points.
Mercedes part pre-order checklist
- Compare product and vehicle photographs at the same angle.
- Confirm year range against the build date.
- Identify any previous bumper or body repair.
- Check whether factory clips can be reused.
- Budget for preparation and installation materials.
- Verify the seller's policy before drilling or bonding.
Mercedes-Benz W118 / C118 CLA FDGT Carbon Trunk Spoiler FAQ
Does this trunk spoiler fit every W118 / C118 CLA?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz W118 / C118 CLA Shooting Brake FD style Carbon Trunk Spoiler
- Mercedes-Benz W118 / C118 CLA FD GTSV Carbon Trunk Spoiler
- Mercedes-Benz W118 / C118 CLA FD ED1 Carbon Trunk Spoiler
- Mercedes-Benz W118 / C118 CLA FD Carbon Trunk Spoiler
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
