The Mercedes-Benz C257 CLS FD GT-V Carbon Side Skirt Splitter sits within the DAS Motor Mercedes-Benz parts cluster. Its suitability depends on chassis, body style, exterior package, material and mounting geometry—not the model badge alone.
Mercedes-Benz C257 CLS FD GT-V Carbon Side Skirt Splitter overview
A side skirt splitter creates a lower visual line between the front and rear wheels and links the front and rear aerodynamic additions. Straightness, end treatment and projection from the sill determine whether both sides of the car appear symmetrical.
The C257 CLS has a low roofline and a wide, tapered rear profile. Exterior additions work best when their width, projection and finish remain consistent with the four-door coupe proportions.
The FD GT-V designation identifies the visual variant of this product. It should be compared directly with the regular FD version, particularly around projection, corner treatment and the way it connects with adjacent bumper or sill lines.
Specifications and Mercedes-Benz application
- Vehicle application: C257 CLS with AMG sport bumper
- Model years: 2018-
- Product type: Side Skirt Splitter
- Style: FD GT-V
- Material: Dry carbon / Vacuum Infusion
- Installation: Add on / drilling screw & bolt
Compatibility and fitment for C257 CLS with AMG sport bumper
Measure the sill length and check jack-point access, underbody covers and the shape of the factory side skirt. The body style and factory exterior package should match the product photographs at every mounting edge.
Use 2018- as the starting range, not the final proof of fitment. Facelift timing, regional equipment and previously replaced body panels can produce a different mounting surface on a car registered in the expected year.
Installation requirements
The stated method is Add on / drilling screw & bolt. Mark and test-fit every mounting point before drilling, protect exposed holes against corrosion where applicable and tighten fasteners evenly rather than pulling an inaccurate part into position.
Long side components should be supported at several points during fitting to avoid twist and uneven fastener spacing. Check clearance through the full movement of nearby panels, wheels or tailgate components before the installation is considered complete.
Material, finish and delivery inspection
The listing identifies Dry carbon / Vacuum Infusion construction. For this type of composite part, low weight is useful, but the practical quality checks are consistent weave direction, an even clear coat, clean edges and mounting surfaces that are not distorted.
Keep all protective film in place during the initial comparison, but lift it only where necessary to inspect the clear coat. Confirm the return procedure before making permanent modifications.
Price, availability and ordering in 2027
DAS Motor can help confirm current price and availability for the exact Mercedes-Benz application. Request a fitment check with the chassis code, model year, body style and clear photographs of the mounting area before purchase.
Product photographs are useful for recognising the design, but they do not replace a measurement or chassis check. Ask for dimensions or a VIN-based confirmation when the exterior package is unclear.
Inspect the underside after lifting the vehicle and after contact with steep ramps or road debris. Record the fitted part in the vehicle's maintenance notes so a workshop knows where non-factory clips, adhesive or drilling points may be present.
Mercedes part pre-order checklist
- Confirm left-hand and right-hand symmetry.
- Measure the principal mounting surface.
- Check cameras, radar and parking sensors.
- Review exhaust and tow-equipment clearance.
- Inspect the delivery before dismantling the car.
- Retain packaging until fitment is established.
Mercedes-Benz C257 CLS FD GT-V Carbon Side Skirt Splitter FAQ
Does this side skirt splitter fit every C257 CLS with AMG sport bumper?
No. Confirm the chassis code, body style, production date, bumper package and mounting geometry. A shared sales name does not guarantee identical exterior panels.
What should be checked before ordering in 2027?
Verify current stock, price, delivery terms, included hardware, material specification and the seller's fitment evidence for the exact VIN or vehicle configuration.
Is professional installation recommended?
Yes. A specialist should dry-fit the component, check symmetry and clearance, and confirm the correct adhesive or mechanical fasteners before any permanent modification.
Related Mercedes-Benz styling guides
- Mercedes-Benz C257 CLS FD Carbon Side Skirt Splitter
- Mercedes-Benz C257 CLS AMG Carbon Mirror Cover
- Mercedes-Benz C257 CLS FD GT-V Carbon Front Lip
- Mercedes-Benz C257 CLS FD Carbon Front Lip
Browse the complete Popular Mercedes Products cluster for Mercedes-Benz carbon parts, exterior accessories, fitment guides and 2027 buying references.
Product specification and photography reference: original product listing. Availability and specifications may change; confirm current details before ordering.
